MS10-H500-Pro Digital Magnetic Hotplate Stirrer

Size the setup around the vessel: the 10-inch square plate provides a 254 × 254 mm working surface, with a specified maximum stirring quantity of 30 L of water.

Set the mixing pace from 100 to 1500 rpm. A brushless DC motor drives the single stirring position, and the LCD makes the speed available for routine checks.

Choose the heating setpoint in 1 °C increments, from room temperature up to a plate temperature of 500 °C. The rated heating output is 1500 W.

Control temperature in the medium by connecting a PT1000 probe. The brochure lists probe accuracy as ±0.2 °C; this is distinct from the instrument’s plate-control and display specifications.

Pair the glass-ceramic surface with routine chemical preparation where resistance to chemical attack matters. Check compatibility with the substances used in your procedure.

Keep operating records through SD-card data logging. The brochure describes real-time recording of instrument running data, without specifying file format or logging interval.

Set run duration from 1 minute to 99 hours 59 minutes, so the operating period can be matched to the method rather than tracked only by an external clock.

Check the residual-heat indication before handling: the HOT warning flashes above 50 °C, including after the hotplate is switched off. Overheating protection is specified at 540 °C.