New Series Glossmeter Calibration Guide: 3 Steps to Precision Measurement

I. Why Must Glossmeters Be Calibrated Regularly?

II. 3 Simple Steps for New Series Glossmeter Calibration: Efficient and Accessible

1. Prepare & Expose: Keep the Calibration Surface PristineOpen the dedicated protective calibration box and carefully remove the dust-proof paper inside to fully expose the clean, unblemished black calibration surface. The calibration tile is a core precision component—handle it with extreme care during operation, and never touch the calibration surface with fingers or tools to avoid oil stains, scratches, or dust residues affecting calibration accuracy. Ensure the calibration surface is clean and undamaged.
2. Attach & Initiate: Ensure a Tight and Stable FitFirmly attach the glossmeter to the opened calibration box, making sure the instrument and the calibration box fit perfectly without gaps or looseness—a secure fit prevents deviations caused by unstable contact during calibration. Then, simply press and hold the power button on the side of the instrument to turn it on; the one-key operation design avoids confusion from complex settings.
3. Automatic Completion: Intelligent Calibration Saves TimeAfter startup, the instrument will automatically detect the calibration environment and calibration tile, initiating the self-calibration routine directly without manual parameter adjustment. The entire process takes only a few seconds to complete. Once calibration is finished, the instrument will automatically switch to measurement mode, and you can immediately start accurate gloss measurement.

III. Key Calibration Notes

1. During storage and transportation, keep the protective calibration box tightly closed and the dust-proof paper properly covered to avoid damage or contamination of the calibration tile;
2. Calibrate in a clean, dry environment with stable temperature (ideally 23±2℃) and relative humidity below 65%. Avoid dusty, humid environments or direct sunlight, as these can affect sensor sensitivity;
3. For high-frequency use scenarios, calibrate once a week; for occasional use, calibrate before each measurement or at least once a month;
4. The instrument's calibration system complies with national and international mainstream standards, and the measurement results can meet quality verification needs in various scenarios.